It is easy, isn’t it?
a. Prepare the materials and equipments.
The materials you MUST prepare are some pieces of plywood and hardwood. As for the equipments, you need to prepare a borer (drill), a saw, some pieces of nails, some screws, and paint.
b. Then, the next thing you need to do is cut into pieces of panels the hardwood and plywood for all the sides of the cabinets as well as the shelving, countertop, etc. Specifically, the hardwood panels are for the countertop. To cut them off, you need to use your saw. Some kinds of saws are possible to use.
c. Using your borer, make holes as many as needed to join all the panels. The amount of the holes depends on the measurements of the whole cabinet unit as well as the quantity of the shelves that you want to make. The holes are made to place the screws.
d. It’s time for fastening. Screw to join all the panels. Leave behind the hardwood panels because they will be used for the top.
e. After joining the panels, then, attach the hardwood panels to the top using nails.
f. The last step of implementing the cabinet design, do finishing. Because we use mostly plywood so painting is the best finishing method.
2. IMPLEMENTATION STEPS